Inside this user manual you’ll find out everything you need to know about your Fly6 Gen3 .

Inside this user manual you&#x2019;ll find out everything you need to know about your Fly6 Gen3&#xA0;.&#xA0;<div class="button-container"><a class="download-button" href="https://attachments.gorgias.help/r1WE86rbrko6J4Mv/hc/GyBLV6kLwK2NbQkK/2025012906-74fb6e8e-8c8d-4cc9-807c-b77e26a71f33-flyce603-fly6-gen-3-user-guide-en.pdf" rel="noopener noreferrer" target="_blank">&#xA0;&#x1F4C4; Download Fly6 Gen3 User Guide (2.4MB)&#xA0;</a></div> <h3 data-identifyelement="476" id> </h3> <style>
.button-container {
 text-align: center;
 margin: 20px 0;
}

.download-button {
 display: inline-block;
 padding: 15px 30px;
 background-color: #ffffff;
 color: #000000;
 text-decoration: none;
 font-weight: bold;
 border-radius: 5px;
 font-size: 16px;
 border: 2px solid #000000;
}

.download-button:hover {
 background-color: inherit;
}

/* Reset hyperlink to default blue */
a[data-identifyelement="468"] {
 color: inherit;
 font-weight: normal;
 text-decoration: underline;
}

a[data-identifyelement="468"]:hover {
 color: inherit;
}
</style>

Fly6 Generation 3 User Manual

Please follow these teps before your first ride.

<h2 id="isPasted">Before Your First Ride</h2>Please Follow These Steps Before Your First Ride With Your Fly6.<ul><li>Fully Charge Your Fly6&#xA0;</li><li>Ensure The Safety Tether Is Correctly Attached</li><li>Ensure The Date And Time Stamps Are Correct</li><li>Register Your Fly6</li></ul><h2 id="insert-your-sd-card">Insert your SD card</h2>Your Fly6&#xA0;3 comes with a 64GB microSD card&#xA0;pre-installed.Your Fly6&#xA0;3 MUST have a&#xA0;microSD card installed to operate.You can insert a microSD card into the microSD card slot of your Fly6 and press in gently until locked in place.Please ensure the notch on the microSD card is pointing upwards towards the top of the Fly6, as illustrated here.To remove your microSD card, gently press down on the microSD card until it releases from the microSD card slot.Note: We highly recommend formatting your microSD card regularly. This will ensure your Fly6 operates at peak performance and guarantee your ride is always recorded. More information of <a href="https://cycliq.gorgias.help/en-US/how-to-format-your-microsd-card-1079373" style=" text-decoration: none;" target="_blank" rel="noopener noreferrer">how to format your microSD card is available here</a>.<img src="https://attachments.gorgias.help/r1WE86rbrko6J4Mv/hc/GyBLV6kLwK2NbQkK/2025012906-c541145c-d7ce-4329-a097-d8e2a9ca2672-3.png" style="width: 300px;" class="fr-fic fr-dib fr-fil"><h2 id="charge-your-unit">Charge your unit</h2>Charging your Fly6 batteryYour Fly6 comes partially charged. Before using it for the first time, please charge the Fly6 fully.To charge:<ul><li data-aria-level="1" data-aria-posinset="1" data-font="Symbol" data-leveltext="&#xF0B7;" data-listid="36">Connect your Fly6 to a USB power adaptor (not supplied)&#xA0;using the supplied USB cable.</li><li data-aria-level="1" data-aria-posinset="2" data-font="Symbol" data-leveltext="&#xF0B7;" data-listid="36">The indicator light will illuminate red showing the Fly6 is charging.</li><li data-aria-level="1" data-aria-posinset="1" data-font="Symbol" data-leveltext="&#xF0B7;" data-listid="36">The indicator light will illuminate green when the Fly6 is fully charged.</li></ul>You can charge your Fly6 using the USB cable provided and your computer&#xA0;however, this will significantly reduce the rate of charge. For the quickest charge, use a USB power&#xA0;adaptor&#xA0;that supports USB fast charge (5V @ 2.1A).Note: The Fly6 is &#x2018;fast charge&#x2019; compatible and accepts up to 2.1 amps. Accordingly, the time to charge from flat to fully charged varies from 1.5&#xA0;to 6 hours depending on the method of charging,&#xA0;I.e.&#xA0;mains power USB at 2.1 amps (not supplied) or computer USB (at as little as 0.1A). Battery life will diminish over time and charge cycles.Battery level indicatorWhen turning on your Fly6, an audible battery status will sound, alerting you to the current battery level. This will indicate whether you have enough power for your next ride. See below for audible notification guide:<img src="https://attachments.gorgias.help/r1WE86rbrko6J4Mv/hc/GyBLV6kLwK2NbQkK/2025012906-0757e2cc-b4de-4a71-b9d8-01b07b069018-4.png" alt width="56" height="48" class="fr-fic fr-dii">4 rapid&#xA0;high pitched&#xA0;beeps = 75% to 100% charged<img src="https://attachments.gorgias.help/r1WE86rbrko6J4Mv/hc/GyBLV6kLwK2NbQkK/2025012906-c48cd161-dc48-418a-9ea0-3268ad5d6503-5.png" alt width="56" height="48" class="fr-fic fr-dii">3 rapid&#xA0;high pitched&#xA0;beeps = 50% to &lt;75% charged<img src="https://attachments.gorgias.help/r1WE86rbrko6J4Mv/hc/GyBLV6kLwK2NbQkK/2025012906-63950545-95cd-4dbc-9f7c-fbf928b5f411-6.png" alt width="56" height="48" class="fr-fic fr-dii">2 rapid&#xA0;high pitched&#xA0;beeps = 25% to &lt;50% charged<img src="https://attachments.gorgias.help/r1WE86rbrko6J4Mv/hc/GyBLV6kLwK2NbQkK/2025012906-1db111dd-701f-4c4e-8c87-dd42c3e86331-7.png" alt width="56" height="48" class="fr-fic fr-dii">1 rapid&#xA0;high pitched&#xA0;beep&#xA0;= 12% to &lt;25% charged<img src="https://attachments.gorgias.help/r1WE86rbrko6J4Mv/hc/GyBLV6kLwK2NbQkK/2025012906-c4573025-47e5-46f0-ab62-613ef7ba20e3-8.png" alt width="56" height="48" class="fr-fic fr-dii">3 long&#xA0;high pitched&#xA0;beeps = Less than 12% charged<h2 id="download-the-cycliqplus-mobile-app">Download the CycliqPlus Mobile App</h2>Download the <a href="https://cycliq.com/software/" target="_blank" rel="noopener noreferrer">CycliqPlus </a>app onto your mobile and pair your device to regularly sync date and time.<ul><li>Launch the CycliqPlus app</li><li>Power your device on to activate Bluetooth</li><li>Search and Connect to your device&#xA0;(Note: connecting the device to the app automatically updated the date and time)</li></ul>&#xA0;<h2 id="format-your-sd-card">Format your SD Card</h2>Format your SD card.The simplest way to do this is by using the CycliqPlus mobile app:<ul><li>Go to Settings</li><li>Under Settings, select System configuration</li><li>Click Format SD card.</li></ul>Note: A popup notification will appear. To proceed, select &#x201C;Format.&#x201D; You will then be notified once formatting is successful.Other ways to format your SD card include through the CycliqPlus desktop app or removing the SD card and connecting it to your computer using a SD card adaptor. For more information check out <a href="https://cycliq.com/support/faqs/using-your-device/what-type-of-sd-cards-can-we-use" rel="noopener noreferrer" target="_blank">cycliq.com/sdcards</a>.<h2 id="register-your-device">Register your device</h2>Register your device for faster support and warranty enquiries.We strongly advise that you register your Fly6 Generation 3 with&#xA0;Cycliq. Once registered, you&#x2019;ll receive notifications for new software or firmware updates, new features and user tips. Registration also speeds up the process should you require assistance with technical support or warranty queries.You can use the button in the top right to register your device<a href="https://cycliq.com/register/"></a>, or use the<s>&#xA0;</s><a href="https://cycliq.com/software/">CycliqPlus</a> mobile app.

Setting up your Fly6 Generation 3

Please follow all the steps to ensure your camera doesn’t separate from your bike during use.

<h2 id="isPasted">Mounting your Fly6 Gen3</h2>Please follow all the steps to ensure your camera doesn&#x2019;t separate from your bike during use.<h2 id="step-1-installing-the-safety-tether">Step 1: Installing the safety tether</h2><ul><li>On the back of the Fly6 there are two holes for the safety tether to be attached through.</li><li>Thread the thinner part of the tether through the holes, then thread the other end through the loop to secure the tether.</li><li>We recommend always using the Fly6 with the tether attached and secured around your seat post.</li></ul><img src="https://attachments.gorgias.help/r1WE86rbrko6J4Mv/hc/GyBLV6kLwK2NbQkK/2025012906-b7772558-4246-4704-9cb1-1e5d65abd0ae-9.png" alt width="300" height="242" srcset="https://cycliq.com/wp-content/uploads/2021/02/CE603-tether-300x242.png 300w, https://cycliq.com/wp-content/uploads/2021/02/CE603-tether-62x50.png 62w, https://cycliq.com/wp-content/uploads/2021/02/CE603-tether.png 418w" sizes="(max-width: 300px) 100vw, 300px" class="fr-fic fr-dii"><h2 id="step-2-mounting-the-camera-to-your-bike">Step 2: Mounting the camera to your bike</h2>Please see the image below on how to mount the device, you will need to turn your Fly6 Generation 3 clockwise.Note: We suggest mounting the seat post mount to your bicycle and then attempting to mount the device, that way there is more stability in order to twist the device.Insert either the standard or aero length seat post strap and pull all the way through until the clasp meets the seat post mount, ensuring the silicon-coated surface grips your seat post.<img src="https://attachments.gorgias.help/r1WE86rbrko6J4Mv/hc/GyBLV6kLwK2NbQkK/2025012906-9e9f7d54-0886-4bd2-a56c-49751bdcbdf4-10.png" alt width="199" height="186" srcset="https://cycliq.com/wp-content/uploads/2021/02/CE603-mounting-1.png 199w, https://cycliq.com/wp-content/uploads/2021/02/CE603-mounting-1-53x50.png 53w" sizes="(max-width: 199px) 100vw, 199px" class="fr-fic fr-dii">Select the appropriate spacer or adapter for your bike. Place the spacer or adapter between the Fly6 seat post mount and the seat post.<img src="https://attachments.gorgias.help/r1WE86rbrko6J4Mv/hc/GyBLV6kLwK2NbQkK/2025012906-038ad52e-89a5-4152-b140-a3052855c86f-11.png" alt width="199" height="186" srcset="https://cycliq.com/wp-content/uploads/2021/02/CE603-mounting-2.png 199w, https://cycliq.com/wp-content/uploads/2021/02/CE603-mounting-2-53x50.png 53w" sizes="(max-width: 199px) 100vw, 199px" class="fr-fic fr-dii">While holding the mount against your seat post, wrap the velcro strap around and feed it through the rectangular hoop at the other end of the strap. Wrap the velcro back on itself to secure your mount.<img src="https://attachments.gorgias.help/r1WE86rbrko6J4Mv/hc/GyBLV6kLwK2NbQkK/2025012906-7f3ce814-b2e0-44f0-9b9b-d9fa05a4d294-12.png" alt width="199" height="186" srcset="https://cycliq.com/wp-content/uploads/2021/02/CE603-mounting-3.png 199w, https://cycliq.com/wp-content/uploads/2021/02/CE603-mounting-3-53x50.png 53w" sizes="auto, (max-width: 199px) 100vw, 199px" class="fr-fic fr-dii">To mount your Fly6 align the tabs on the Fly6 with the slots in the seat post mount. Turn Fly6&#xA0;clockwise a 1/8th turn until you hear a click and then the Fly6 will be locked into the seat post mount.<img src="https://attachments.gorgias.help/r1WE86rbrko6J4Mv/hc/GyBLV6kLwK2NbQkK/2025012906-e19490c6-553e-458c-9538-96f32754dc4e-13.png" alt width="199" height="186" srcset="https://cycliq.com/wp-content/uploads/2021/02/CE603-mounting-4.png 199w, https://cycliq.com/wp-content/uploads/2021/02/CE603-mounting-4-53x50.png 53w" sizes="auto, (max-width: 199px) 100vw, 199px" class="fr-fic fr-dii">You can easily remove your Fly6 from the bike by removing it from the seat post mount with a 1/8th turn&#xA0;anticlockwise. You can leave the mount on your bike for next use.Note: The Fly6 must be mounted in an upright position as mounted.<hr>Ready for your first ride? Check out <a href="https://cycliq.gorgias.help/en-US/start-up-and-first-ride-1079367" target="_blank" rel="noopener noreferrer">Start Up and First Ride</a>.

Mounting your Fly6 Generation 3

Press and hold the power button for approximately 3-4 seconds until the rotating LED bezel illuminates and the power on chime is heard – then release.

<h2 id="isPasted">Turning on your Fly6</h2>Press and hold the power button for approximately 3-4 seconds until the rotating LED bezel illuminates and the power on chime is heard &#x2013; then release. Power level beeps will sound indicating the battery status, see below.<table cellpadding="0" cellspacing="0"><tbody><tr><th>Battery level is 75%+</th><td>4 beeps</td></tr><tr><th>Battery level is 50-75%</th><td>3 beeps</td></tr><tr><th>Battery level is 25-50%</th><td>2 beeps</td></tr><tr><th>Battery level is under 25%</th><td>1 beep</td></tr></tbody></table><h2 id="turning-off-your-fly6">Turning off your Fly6</h2>Press and hold the power button for approximately 3-4 seconds until the power level beeps sound to indicate battery status and the power off chime is heard, or the LEDs have turned off.<h2 id="before-your-first-ride">Before your first ride</h2>Please follow the below steps before using your new Fly6 Generation 3 for the first time:Fully charge the deviceTo charge:<ul><li>Connect your Fly6 to a USB power adapter (not supplied) using the supplied USB cable.</li><li>The indicator light will illuminate red showing the Fly6 is charging.</li><li>The indicator light will illuminate green when the Fly6 is fully charged.</li></ul>You can charge your Fly6 using the USB cable provided and a computer however, this will significantly reduce the rate of charge. For the quickest charge, use a USB power adapter that supports USB &#x2018;fast charge&#x2019; (5V @ 2.1A).Ensure your Fly6 port cover is securely closed<img src="https://attachments.gorgias.help/r1WE86rbrko6J4Mv/hc/GyBLV6kLwK2NbQkK/2025012906-9c1f3edc-1ff6-4d86-9ab8-ffa2bff72714-14.png" alt width="300" height="167" srcset="https://cycliq.com/wp-content/uploads/2021/02/CE603-sdcard-placement-300x167.png 300w, https://cycliq.com/wp-content/uploads/2021/02/CE603-sdcard-placement-90x50.png 90w, https://cycliq.com/wp-content/uploads/2021/02/CE603-sdcard-placement-510x285.png 510w, https://cycliq.com/wp-content/uploads/2021/02/CE603-sdcard-placement.png 631w" sizes="(max-width: 300px) 100vw, 300px" class="fr-fic fr-dii">Ensure your safety tether is correctly attachedAttaching the safety tether to your Fly6:<ul><li>On the back of the Fly6 there are 2 holes for the safety tether to be attached through.</li><li>Thread the thinner part of the tether through the holes, then thread the other end through the loop to secure the tether.</li><li>We recommend always using the Fly6 with the tether attached and secured around your seat post.</li></ul>Ensure the date and timestamps are correctly syncedThe Fly6 Generation 3 is automatically synced with the date and time information from your smartphone when connecting to the CycliqPlus mobile app.

Start up and first ride

This can be done via desktop computer or through your mobile device.

<h2 id="isPasted">Reviewing your Fly6 Gen3 footage</h2>Once you have finished your ride, you will want to review your footage. This can be done via desktop computer or through your mobile device.<h3 id="isPasted">Reviewing your footage on your&#xA0;desktop</h3><ol><li>Turn your device off and unmount your device from your bike</li><li>Open the port cover and insert the USB-C cable</li><li>With your computer turned on, insert the USB cable into your computer&#x2019;s USB port and open Finder (Apple users) or File Explorer (Windows users). The device should be automatically recognised.</li><li>Open Fly6 Generation 3 Folder and DCIM folder then 100_RIDE</li><li>Select your desired recording and watch using your media player</li></ol>Note: We recommend using QuickTime or Windows Media Player to view your recorded footage. <h2 id="reviewing-your-footage-on-your-mobile-handset">Reviewing your footage on your mobile handset</h2>If you have a smartphone that allows you to access the SD card reader, you can insert your SD card into the slot and access your footage through your mobile handset&#xA0; If your phone does not have an easily accessible SD card slot, you can also upload footage to your phone using <a href="https://cycliq.gorgias.help/en-US/how-to-connect-your-fly12-sport-with-usb-on-the-go-1079352" style=" text-decoration: none;" target="_blank" rel="noopener noreferrer">Cycliq&#x2019;s microSD OTG Card Readers.</a>To access your footage using your phone SD card:<ul><li>Turn your device off and unmount your device from your bike.</li><li>Remove your SD card from the SD card slot on the side of the device and insert it into the SD card slot in your handset.</li><li>On your handset go to the File Manager and open external storage &gt; DCIM &gt; 100_RIDE</li><li>Select your desired recording and copy the file to your smartphone internal</li><li>Once copying is completed, you may remove your SD card from your handset</li><li>Launch CycliqPlus app</li><li>Click the menu button &gt; Video Editor &gt; Gallery &gt; Open File Folder</li><li>You can then edit your footage, add strava data, tramlines and share with your friends through the CycliqPlus app.</li></ul><img src="https://attachments.gorgias.help/r1WE86rbrko6J4Mv/hc/GyBLV6kLwK2NbQkK/2025012906-142bb05d-ec73-4c86-8b68-53044807d18a-15.png" data-fileid="13059160908" class="fr-fic fr-dii"><img src="https://attachments.gorgias.help/r1WE86rbrko6J4Mv/hc/GyBLV6kLwK2NbQkK/2025012906-b3748e63-aee4-4d80-a83b-8ecc16cb9b83-16.png" data-fileid="13059160910" class="fr-fic fr-dii"><img src="https://attachments.gorgias.help/r1WE86rbrko6J4Mv/hc/GyBLV6kLwK2NbQkK/2025012906-e265ddfa-9883-4f5e-a249-e259cf7cbf11-17.png" data-fileid="13059160915" class="fr-fic fr-dii">If your phone does not have an easily accessible SD card slot, you can also upload footage to your phone using USB On-The-Go.<h2 id="reviewing-your-footage-with-usb-on-the-go-otg">Reviewing your footage with USB On-The-Go (OTG)</h2>To review your footage with USB OTG you will need a compatible SD card reader (not supplied).For Apple handsets: insert your SD card into an SD card adaptor then into an iPhone<a href="https://cycliq.com/product/microsd-card-reader/?srsltid=AfmBOoo08dbfQh2h6D5Q1AGYb_C1oJw3ZWNdQmgJD2McyvR0_gNSAkrv" rel="noopener noreferrer" target="_blank"> Lightning to SD card camera reader</a> and connect your Fly6 using the supplied USB cable.For Android handsets: use a SD card reader that connects to your charging port.Connect your SD card adaptor to your OTG reader and connect your OTG reader to your phone.<ul><li>Open your file manager</li><li>Select your desired recording and import or drag the file to your phone storage</li><li>Launch CycliqPlus app</li><li>Click the menu button &gt; Video Editor &gt; Edit Icon &gt; Open Photos App</li></ul>

Reviewing your Fly6 Generation 3 Footage

Shop

Contact Support

Cycliq

Getting Started

Fly6 Gen3

Fly6 Pro Video Tutorials

Introducing The Fly6 Pro

How To: Operate Your Fly6 Pro

How To: Mount Your Fly6 Pro

How To: Attach Fly6 Pro Lens Protectors

How To: Connect Your Fly6 Pro To CycliqPlus

How To: WiFi Transfer With The Fly6 Pro

Video Tutorials

Fly6 Pro User Manual

Setting up your Fly6 Pro

Getting to know the OLED screen on your Fly6 Pro

Mounting your Fly6 Pro

Reviewing your Fly6 Pro footage

Master reset

Fly6 Pro WiFi Transfer with CycliqPlus

How to register your Fly6 Pro

How to update your Fly6 Pro firmware

How to perform a bench test

How to format your microSD card

How to connect your Fly6 Pro with USB OTG Readers

How-to Guides

Applying the Fly6 Pro Lens Protector

Accessories

microSD Card Compatibility

Power Issues

Connectivity Issues

Footage Issues

Battery Issues

Recording Issues

Help

Fly6 Pro

Fly12 Sport Video Tutorials

How To: Operate Your Fly12 Sport

How To: Tether Your Fly12 Sport

How To: Charge Your Fly12 Sport

How To: Mount Your Fly12 Sport

How To: Attach Fly12 Sport Lens Protectors

How To: Review Your Footage On A Desktop

How To: Format Your MicroSD Card On Mobile

How To: Format Your MicroSD Card On Desktop

How To: Perform A Master Reset On Your Fly12 Sport

Fly12 Sport User Manual

Setting up your Fly12 Sport

Mounting your Fly12 Sport

Reviewing your Fly12 Sport footage

How to master reset your Fly12 Sport

How to register your Fly12 Sport

How to update your Fly12 Sport firmware

How to factory reset your Fly12 Sport

Fly12 Sport

Fly6 Gen3 Video Tutorials

How to register your Fly6 Generation 3

How to reset the Fly6 Generation 3 with deep sleep mode

How to update your Fly6 Generation 3 firmware

How to use the bike alarm

How to perform a master reset on a Fly6 Generation 3

CycliqPlus Smartphone System Requirements

Smartphone Connectivity Issues

Why can’t I connect my device to the app?

Why is my footage not showing on the mobile app?

CycliqPlus Mobile

CycliqPlus Desktop - Minimum System Requirements

CycliqPlus Desktop Troubleshooting

Desktop Connectivity Issues

Safety Tramlines

Working with your Fly Devices

Video Editor

Metrics Overlay

CycliqPlus Desktop

Installing CycliqPlus Edge

Using CycliqPlus Edge

Configuring Auto Start Up

CycliqPlus Edge Device Requirements

CycliqPlus Edge

CycliqPlus

How long does shipping take?

Are tax and duty fees included?

How can I track my order?

Do you accept bulk purchases?

Can I purchase individual parts included in a product?

Do you have samples showing the video quality of your devices?

Ordering Online

Is there a warranty?

Caution

Do you have a returns policy?

Do you have a service centre for repairs?

I accidentally damaged my device. Can I purchase replacement parts?

How long is the battery life?

Why is my device turning off?

My device is not taking charge, what should I do?

My device is not turning on, what should I do?

Where can I send my unit for warranty?

Do you have a phone number I can call?

What type of SD cards can we use?

Customer Support

Fly12 CE User Manual

Setting up your Fly12 CE

Mounting your Fly12 CE

Reviewing your Fly12 CE footage

How to register your Fly12 CE

How to perform a master reset on a Fly12 CE

How to connect your Fly12 CE with USB On-The-Go

Recording issues

Battery issues

Fly12 CE

Fly12 User Manual

Fly12 Quick Start Guide

Setting up your Fly12

Mounting your Fly12

Using your Fly12

Understanding beeps and lights on a Fly12

Reviewing your Fly12 footage

How to format your SD card

How to mount and attach a tether to Fly12

How to update your Fly12 firmware

How to perform a master reset on a Fly12

How to connect your Fly12

I can’t connect to my smartphone

I can’t get my video onto my computer

My device is not recording properly

Battery life

Fly12 (Non-CE)

Fly6 CE User Manual

Setting up your Fly6 CE

Mounting your Fly6 CE

Reviewing your Fly6 CE footage

How to register your Fly6 CE

CE to ANT+Connection Guide for Fly6

How to connect your Fly6 CE with USB On-The-Go

How to perform a master reset on a Fly6 CE

Fly6 CE

Fly6 User Manual

Fly6 Quick Start Guide

Setting up your Fly6

Mounting your Fly6

Using your Fly6

Understanding beeps on a Fly6

Reviewing your Fly6 footage

How to update your Fly6 firmware

Issues with my footage

Fly6 (Non-CE)

Fly6[v] User Manual

Fly6[v] Quick Start Guide

Setting up your Fly6[v]

Mounting your Fly6[v]

Using your Fly6[v]

Understanding beeps on a Fly6[v]

Reviewing your Fly6[v] footage

How to update your Fly6[v] firmware

Fly6[V]

Fly6 Original Quick Start Guide

Fly6 Original User Manual

Setting up your Fly6 Original

Mounting your Fly6 Original

Using your Fly6 Original

Understanding beeps on a Fly6 Original

Reviewing your Fly6 Original footage

How to install Fly6 Original firmware

Fly6 Original

Legacy Fly Devices

Fly6 Pro Quick Start Guide

Fly12 Sport Quick Start Guide

Fly6 GEN 3 Quick Start Guide

Fly12 CE Quick Start Guide

Fly6 CE Quick Start Guide

Quick Start Guides