Register your Fly6 Generation 3 to receive faster warranty support and product updates.

Register your Fly6 Generation 3 to receive faster warranty support and product updates.You can register your Cycliq Fly here on the Cycliq website, or via the CycliqPlus app for Android, iOS, PC and Mac.We recommend using the CycliqPlus mobile or desktop app as it automatically detects your Fly&#x2019;s serial number and pre-fills the Cycliq Product Registration form. <h2 id="register-your-fly6-gen-3-via-the-cycliqplus-mobile-app-recommended">Register your Fly6 GEN 3 via the CycliqPlus mobile app (Recommended)</h2>You can register your Fly6 GEN 3 with the <a href="https://cycliq.com/software/">CycliqPlus mobile app</a> for Android and iOS.<ul><li>Open the CycliqPlus mobile app</li><li>Connect to your Fly6 GEN 3</li><li>From the hamburger menu in the top left corner select Register Device</li><li>Scan the barcode or manually enter the serial number</li><li>Confirm your registration</li></ul><h3 id="register-your-fly6-gen-3-via-the-cycliqplus-desktop-app">Register your Fly6 GEN 3 via the CycliqPlus desktop app</h3>You can register your Fly6 GEN 3 with the <a href="https://cycliq.com/software/">CycliqPlus desktop app</a> for PC and Mac.<ul><li>Open the CycliqPlus desktop app</li><li>Connect to your Fly6 GEN 3</li><li>From the left side panel note down the serial number</li><li>You can use the button in the top right to register your device</li><li>Select &#x201C;Fly6 GEN 3&#x201D; from the list of devices</li><li>Enter your Fly6 GEN 3 serial number</li><li>Confirm your registration</li></ul><h3 id="register-your-fly6-gen-3-via-the-cycliq-website">Register your Fly6 GEN 3 via the Cycliq website</h3>You can use the button in the top right to register your device and fill in the registration form.See the section &#x201C;Where to find your Fly6 GEN 3 serial number&#x201D; below to find your Fly6 GEN 3 serial number.<ol><li>Select &#x201C;Fly6 GEN 3&#x201D; from the list of devices</li><li>Enter your Fly6 GEN 3 serial number</li><li>Confirm your registration details</li><li>Enjoy your Fly!</li></ol><h2 id="where-to-find-your-fly6-gen-3-serial-number">Where to find your Fly6 GEN 3 serial number</h2>You can find your Fly6 GEN 3 serial number in the following places:<ul><li>By connecting via the <a href="https://cycliq.com/software/">CycliqPlus mobile app</a> and looking in Settings &gt; About Device</li><li>By connecting via the <a href="https://cycliq.com/software/">CycliqPlus Desktop app</a> on your PC or Mac. Either connect the USB-C cable to your Fly or insert the Fly6 GEN 3 microSD card into your computer, then start the CycliqPlus app and your Fly&#x2019;s serial number will be displayed</li><li>Underneath your Fly6 GEN 3 box. See the section &#x201C;Location of the serial number on the Fly6 GEN 3 box&#x201D; below for the correct place to look for it.</li></ul><h3 id="location-of-the-serial-number-on-the-fly6-gen-3-box">Location of the serial number on the Fly6 GEN 3 box</h3><img src="https://attachments.gorgias.help/r1WE86rbrko6J4Mv/hc/GyBLV6kLwK2NbQkK/2025012907-62df6ead-c032-4f98-a8fe-dc7bcf01d4a0-18.png" alt width="931" height="620" srcset="https://cycliq.com/wp-content/uploads/2022/03/KV8U2rbgAUe0eA_r61nRwp8CGdFiiVm5hg.png 931w, https://cycliq.com/wp-content/uploads/2022/03/KV8U2rbgAUe0eA_r61nRwp8CGdFiiVm5hg-300x200.png 300w, https://cycliq.com/wp-content/uploads/2022/03/KV8U2rbgAUe0eA_r61nRwp8CGdFiiVm5hg-768x511.png 768w, https://cycliq.com/wp-content/uploads/2022/03/KV8U2rbgAUe0eA_r61nRwp8CGdFiiVm5hg-75x50.png 75w, https://cycliq.com/wp-content/uploads/2022/03/KV8U2rbgAUe0eA_r61nRwp8CGdFiiVm5hg-510x340.png 510w" sizes="(max-width: 931px) 100vw, 931px" class="fr-fic fr-dii">

How to register your Fly6 Generation 3

This deep sleep mode action is only recommended if you are unable to turn the device on and have exhausted all other methods explained in Power Issues.

This deep sleep mode action is only recommended if you are unable to turn the device on and have exhausted all other methods explained in&#xA0;<a href="https://cycliq.gorgias.help/en-US/power-issues-1079512" style=" text-decoration: none;" target="_blank" rel="noopener noreferrer">Power Issues</a>.Note: The Fly6 Generation 3 must be powered off to perform this action.<img src="https://attachments.gorgias.help/r1WE86rbrko6J4Mv/hc/GyBLV6kLwK2NbQkK/2025012908-12726eb6-a209-47d0-b3fb-8af51d148783-18.png" alt width="300" height="156" srcset="https://cycliq.com/wp-content/uploads/2021/02/CE603-master-reset-300x156.png 300w, https://cycliq.com/wp-content/uploads/2021/02/CE603-master-reset-96x50.png 96w, https://cycliq.com/wp-content/uploads/2021/02/CE603-master-reset-320x165.png 320w, https://cycliq.com/wp-content/uploads/2021/02/CE603-master-reset.png 481w" sizes="(max-width: 300px) 100vw, 300px" class="fr-fic fr-dii"><ol><li>Ensure the Fly6 Generation 3 is turned off</li><li>Hold down the Q button for 30 seconds</li><li>The LED will flash white</li><li>Release the Q button</li><li>The LED may flash blue</li><li>Wait 30 seconds</li><li>Tap the Power button once to complete this action</li><li>Wait 30 seconds</li><li>Hold down the Power button for 2-3 seconds to turn on the device</li></ol>Warning: Holding down the Power button as part of step 7 may damage your Fly6 Generation 3.

How to reset the Fly6 Generation 3 with deep sleep mode

Cycliq devices require microSD cards to be formatted to FAT32 to correctly function.

Cycliq devices require microSD cards to be formatted to FAT32 to correctly function.We recommend that you format your microSD card with the <a href="https://cycliq.com/software/" rel="noopener noreferrer" target="_blank">CycliqPlus mobile app</a> as it is designed with this task in mind.That said, there are several ways you can format your Fly6 GEN 3&#x2019;s microSD card:<ul><li>Formatting with the CycliqPlus mobile app</li><li>Formatting with Windows</li><li>Formatting with macOS</li></ul><h2 id="formatting-with-the-cycliqplus-mobile-app">Formatting with the CycliqPlus mobile app</h2><img src="https://attachments.gorgias.help/r1WE86rbrko6J4Mv/hc/GyBLV6kLwK2NbQkK/2025013000-efa3464f-5c22-499e-85f0-212c4b0b6856-19.png" data-fileid="13059161499" class="fr-fic fr-dii"><ul><li>Open the <a href="https://cycliq.com/software/">CycliqPlus mobile app</a></li><li>Turn on your Fly6 GEN 3</li><li>Select the Scan button and connect to your Fly6 GEN 3</li><li>Select the Settings button</li><li>Open the System configuration screen</li><li>Select Format SD card and confirm the prompt</li></ul>You have now formatted the microSD card on your Fly6 GEN 3. You&#x2019;re ready to ride!<h2 id="formatting-with-macoswindows">Formatting with macOS/Windows</h2>You can format your Fly6 GEN 3&#x2019;s microSD card with your computer by connecting the provided USB cable.With the USB cable connected turn the Fly6 GEN 3 on. It will be detected as a Mass Storage disk in macOS/Windows.Note: If your Fly6 GEN 3 is not recognised, please use an SD card adapter and plug the microSD card directly into your computer.<h3 id="for-windows">For Windows</h3>Note: The&#xA0;disk formatting tool that comes with&#xA0;Windows&#xA0;8/10&#xA0;is unable to&#xA0;format&#xA0;microSD&#xA0;cards larger than 32GB as FAT32.We recommend using the free&#xA0;<a href="https://rufus.ie/en/" rel="noopener" style=" text-decoration: none;" target="_blank">Rufus Formatting Tool</a> for Windows&#xA0;8/10 users to correctly format microSD cards larger than 32GB as FAT32.<a href="https://rufus.ie/en/" rel="noopener" style=" text-decoration: none;" target="_blank">Download Rufus</a>Insert the microSD card into your computer preferably using a card reader; it can also be performed over the provided USB cable.Once you have downloaded and installed the software, please open the application Rufus.<figure><img data-fr-image-pasted="true" src="https://cycliq.com/wp-content/uploads/2021/06/cycliq-rufus.png" alt width="471" height="606" srcset="https://cycliq.com/wp-content/uploads/2021/06/cycliq-rufus.png 471w, https://cycliq.com/wp-content/uploads/2021/06/cycliq-rufus-233x300.png 233w, https://cycliq.com/wp-content/uploads/2021/06/cycliq-rufus-39x50.png 39w" sizes="(max-width: 471px) 100vw, 471px" class="fr-fic fr-dii"><figcaption>The red boxes highlight the Rufus settings you need to adjust.</figcaption></figure>Follow these steps to ensure the formatting process is completed correctly.<ol><li>Device &#x2013; Select your microSD card</li><li>Boot Selection &#x2013; Non bootable</li><li>Partition scheme &#x2013; MBR</li><li>Target system &#x2013; BIOS or EUFI</li><li>File System &#x2013; Large FAT32 (Default)</li><li>Cluster size &#x2013; 32 Kilobytes (Default)</li><li>Click the Show advanced format options link and untick Create extended label and icon files</li><li>Then click START<img src="https://attachments.gorgias.help/r1WE86rbrko6J4Mv/hc/GyBLV6kLwK2NbQkK/2025013000-4d94d6f7-5dfe-4849-a6fd-82f73b0b61e1-20.png" style="width: 300px;" class="fr-fic fr-dib"></li></ol>After formatting, simply re-insert the microSD card into your Fly6 GEN 3 and turn it on.The device will automatically re-install the system files and you will be good to go!<h3 id="for-macos">For macOS</h3>See the following video tutorial on how to format your Fly6 GEN 3&#x2019;s microSD card.<iframe src="https://www.youtube.com/embed/UmIanMx1HDM?wmode=opaque" width="640" height="360" frameborder="0" sandbox="allow-scripts allow-forms allow-same-origin allow-presentation" allowfullscreen="allowfullscreen" data-gtm-yt-inspected-28="true" data-gtm-yt-inspected-33="true" data-gtm-yt-inspected-45="true"></iframe>

How to format your microSD card

A bench test for your Fly6 Generation 3 device is to check the life of the battery.

A bench test is a test to ensure a device works as specified. A bench test for your Fly6 Generation 3 device is to check the life of the battery.To perform a bench test:<ol><li><a href="https://cycliq.gorgias.help/en-US/1079373-de81f569157546ef86ad7c7a324d4739" style=" text-decoration: none;" target="_blank" rel="noopener noreferrer">Format your SD card</a></li><li>Disable Idle mode and Incident protection mode via the <a href="https://cycliq.com/software/">CycliqPlus mobile app or desktop app</a></li><li>Under &#x201C;Set device time&#x201D; set the time to computer</li><li>Set the &#x201C;Video segment length&#x201D; to 10 minutes</li><li>Select &#x201C;Format SD card&#x201D;</li><li>Fully charge your device (LED will turn green when battery reaches 100%)</li><li>Once fully charged take note of the time that you start the test</li><li>Place the unit on a flat surface and switch it onNote: We recommend turning off the LED lights so you can find out how long the battery lasts in Camera only mode</li><li>Let the battery drain fully and note how long this has taken</li></ol>

How to perform a bench test

Your Fly6 GEN 3 should be kept up-to-date in order to take advantage of improvements and fixes.

<h2 id="isPasted">How to update your firmware</h2>Your Fly6 GEN 3 should be kept up-to-date in order to take advantage of improvements and fixes. Firmware updates are free, and easy to install.Firmware updates can be installed through the CycliqPlus for Desktop app available for Windows and Mac.<a href="https://cycliq.com/software/">Download CycliqPlus for Desktop</a><h2 id="cycliqplus-for-desktop">CycliqPlus for Desktop</h2>CycliqPlus for Desktop automatically checks for firmware updates automatically each time your Fly device is connected to a computer. If a firmware update is available for your Fly device you will be see an on-screen prompts with simple steps to apply the update and keep your Fly up to date.For information on downloading and installing CycliqPlus for Desktop, follow the link below.<a href="https://cycliq.com/support/cycliqplus/how-to-guides/installing-cycliqplus-deskop/">Installing CycliqPlus for Desktop</a>

How to update your Fly6 Generation 3 firmware

If the device is moved while the alarm function is active, the alarm will trigger and your device will start recording.

The Fly6 Generation 3 has a bike alarm that can be activated via the&#xA0;<a href="https://cycliq.com/software/" style=" text-decoration: none;">CycliqPlus mobile app</a>.If the device is moved while the alarm function is active, the alarm will trigger and your device will start recording. If your Smartphone is within Bluetooth range you will also receive a notification that the alarm is active.<img src="https://attachments.gorgias.help/r1WE86rbrko6J4Mv/hc/GyBLV6kLwK2NbQkK/2025013000-0ce96295-0aff-4dde-843c-935a6b75b897-21.png" alt width="473" srcset="https://cycliq.com/wp-content/uploads/2021/02/CE603-alarmoff-473x1024.png 473w, https://cycliq.com/wp-content/uploads/2021/02/CE603-alarmoff-139x300.png 139w, https://cycliq.com/wp-content/uploads/2021/02/CE603-alarmoff-23x50.png 23w, https://cycliq.com/wp-content/uploads/2021/02/CE603-alarmoff-510x1105.png 510w, https://cycliq.com/wp-content/uploads/2021/02/CE603-alarmoff.png 591w" sizes="(max-width: 473px) 100vw, 473px" class="fr-fic fr-fil fr-dii" style="width: 302px; height: 653.801px;">&#xA0;<img src="https://attachments.gorgias.help/r1WE86rbrko6J4Mv/hc/GyBLV6kLwK2NbQkK/2025013000-cfab6156-759f-4d0f-9bfd-aee9a48ed894-22.png" alt width="473" srcset="https://cycliq.com/wp-content/uploads/2021/02/CE603-alarmon-473x1024.png 473w, https://cycliq.com/wp-content/uploads/2021/02/CE603-alarmon-139x300.png 139w, https://cycliq.com/wp-content/uploads/2021/02/CE603-alarmon-23x50.png 23w, https://cycliq.com/wp-content/uploads/2021/02/CE603-alarmon-510x1105.png 510w, https://cycliq.com/wp-content/uploads/2021/02/CE603-alarmon.png 591w" sizes="(max-width: 473px) 100vw, 473px" class="fr-fic fr-dii fr-fil" style="width: 303px; height: 655.966px;"> To activate the bike alarm, open the CycliqPlus mobile app and connect to your device. Then simply toggle the alarm button on the home screen.To deactivate the alarm, click OK on the alarm notification (if visible) and then toggle the alarm button in the mobile app.

How to use the bike alarm

This master reset is only recommended if you are unable to turn the device off.

The Fly6 Generation 3 must be powered on to perform a master reset. This master reset is only recommended if you are unable to turn the device off.<img src="https://attachments.gorgias.help/r1WE86rbrko6J4Mv/hc/GyBLV6kLwK2NbQkK/2025013000-607949ba-edf7-42a0-86d0-e85fd1f122e2-23.png" alt width="300" height="156" srcset="https://cycliq.com/wp-content/uploads/2021/02/CE603-master-reset-300x156.png 300w, https://cycliq.com/wp-content/uploads/2021/02/CE603-master-reset-96x50.png 96w, https://cycliq.com/wp-content/uploads/2021/02/CE603-master-reset-320x165.png 320w, https://cycliq.com/wp-content/uploads/2021/02/CE603-master-reset.png 481w" sizes="(max-width: 300px) 100vw, 300px" class="fr-fic fr-dii"><ul><li>Hold down the Q button for 10 seconds.</li><li>This reboot may cause the LED and the communications to shut down, however the device will continue recording</li><li>Release the Q button</li></ul>Warning:&#xA0;Do not attempt a master reset when the unit is in the process of completing a firmware update as this may damage your Fly6 Generation 3.

How to perform a master reset on a Fly6 Generation 3

Submit a Support Ticket

Register Device

Cycliq

How-to Guides

Fly6 Gen3

Fly6 Pro Video Tutorials

Video Tutorials

Fly6 Pro User Manual

Setting up your Fly6 Pro

Getting to know the OLED screen on your Fly6 Pro

Mounting your Fly6 Pro

Reviewing your Fly6 Pro footage

Getting Started

Master reset

Fly6 Pro WiFi Transfer with CycliqPlus

How to register your Fly6 Pro

How to update your Fly6 Pro firmware

How to connect your Fly6 Pro with USB OTG Readers

Applying the Fly6 Pro Lens Protector

Accessories

microSD Card Compatibility

Power Issues

Connectivity Issues

Footage Issues

Battery Issues

Recording Issues

Help

Fly6 Pro

Fly12 Sport Video Tutorials

Fly12 Sport User Manual

Setting up your Fly12 Sport

Mounting your Fly12 Sport

Reviewing your Fly12 Sport footage

How to master reset your Fly12 Sport

How to register your Fly12 Sport

How to update your Fly12 Sport firmware

How to factory reset your Fly12 Sport

Fly12 Sport

Fly6 Gen3 Video Tutorials

Fly6 Generation 3 User Manual

Setting up your Fly6 Generation 3

Mounting your Fly6 Generation 3

Start up and first ride

Reviewing your Fly6 Generation 3 Footage

CycliqPlus Smartphone System Requirements

Smartphone Connectivity Issues

Why can’t I connect my device to the app?

Why is my footage not showing on the mobile app?

CycliqPlus Mobile

CycliqPlus Desktop - Minimum System Requirements

CycliqPlus Desktop Troubleshooting

Desktop Connectivity Issues

Safety Tramlines

Working with your Fly Devices

Video Editor

Metrics Overlay

CycliqPlus Desktop

CycliqPlus

How long does shipping take?

Are tax and duty fees included?

How can I track my order?

Do you accept bulk purchases?

I don’t need the whole pack. Can I purchase individual accessory parts?

Do you have samples showing the video quality of your devices?

Ordering Online

Is there a warranty?

Caution

Do you have a returns policy?

Do you have a service centre for repairs?

I accidentally damaged my device. Can I purchase replacement parts?

How long is the battery life?

Why is my device turning off?

My device is not taking charge, what should I do?

My device is not turning on, what should I do?

Where can I send my unit for warranty?

Do you have a phone number I can call?

Customer Support

Recording issues

Battery issues

Fly12 CE User Manual

Setting up your Fly12 CE

Mounting your Fly12 CE

Reviewing your Fly12 CE footage

How to register your Fly12 CE

How to perform a master reset on a Fly12 CE

ANT+ Connection Guide for Fly12 CE

How to connect your Fly12 CE with USB On-The-Go

Fly12 CE

I can’t connect to my smartphone

I can’t get my video onto my computer

My device is not recording properly

Battery life

Fly12 User Manual

Fly12 Quick Start Guide

Setting up your Fly12

Mounting your Fly12

Using your Fly12

Understanding beeps and lights on a Fly12

Reviewing your Fly12 footage

How to format your SD card

How to mount and attach a tether to Fly12

How to update your Fly12 firmware

How to perform a master reset on a Fly12

How to connect your Fly12

Fly12 (Non-CE)

Fly6 CE User Manual

Setting up your Fly6 CE

Mounting your Fly6 CE

Reviewing your Fly6 CE footage

How to register your Fly6 CE

CE to ANT+Connection Guide for Fly6

How to connect your Fly6 CE with USB On-The-Go

How to perform a master reset on a Fly6 CE

Fly6 CE

Issues with my footage

Fly6 User Manual

Fly6 Quick Start Guide

Setting up your Fly6

Mounting your Fly6

Using your Fly6

Understanding beeps on a Fly6

Reviewing your Fly6 footage

How to update your Fly6 firmware

Fly6 (Non-CE)

Fly6[v] User Manual

Fly6[v] Quick Start Guide

Setting up your Fly6[v]

Mounting your Fly6[v]

Using your Fly6[v]

Understanding beeps on a Fly6[v]

Reviewing your Fly6[v] footage

How to update your Fly6[v] firmware

Fly6[V]

Fly6 Original Quick Start Guide

Fly6 Original User Manual

Setting up your Fly6 Original

Mounting your Fly6 Original

Using your Fly6 Original

Understanding beeps on a Fly6 Original

Reviewing your Fly6 Original footage

How to install Fly6 Original firmware

Fly6 Original

Legacy Fly Devices