Setting up your Fly12

Modified on: 2019-02-05 14:05:51 +0800


Step 1: Inside the Box

Firstly, let's check to see if you have all of the goods. Your Fly12 should come with the following:

Note: Standard Tripod Mount is for packaging purpose only. It is not intended for bike mounts.


Step 2: Insert your SD card

Your Fly12 comes with a 16GB SD card. Make sure it is properly inserted as it is unable to record without a microSD card installed. 

Insert a compatible microSD card into the microSD card slot of your Fly12 device, metallic strip side first, and press in gently until locked in place.

To remove your microSD card, gently press down on the card until it releases from the microSD card slot.


Visit https://cycliq.com/sdcards/ for compatible SD cards.


Step 3: Charge your unit

  • Connect your device to a USB wall charger (not supplied) using the supplied USB cable
  • The charge indicating light will illuminate showing that the device is charging
  • When the device is fully charged the LED will illuminate green

You can charge your Fly12 using the USB cable provided and your computer, however this will significantly reduce the rate of charge. 


For fastest charging, we recommend using a USB wall charger with a capacity of 5V 1.0A. The time to charge from flat to fully charged varies from 4 to 8 hours depending on the method of charging i.e. mains power USB or computer USB. 


Step 4: Download the CycliqPlus Mobile App

Download CycliqPlus app onto your mobile and pair your device to sync date and time.


  • Launch the app
  • Power your device on to activate Bluetooth
  • Search and Connect to your device


Step 5: Format your SD Card

Format the SD card via the CycliqPlus mobile app

  • Go to Settings
  • Under settings, select System Configuration
  • Click Format SD card.

Note: A popup notification will appear. To proceed, select “Format.” You will then be notified once formatting is successful.


Step 6: Register your device

Register your device for faster support and warranty enquiries. You can register your device in minutes through this form.



Next: Let's mount your Fly12 camera to your bike



Did you find it helpful? Yes No

Can you please tell us how we can improve this article?