Cycliq logo

Mounting your Fly6 Original

Modified on: 2019-01-29 10:13:40 +0800


Please follow all the steps to ensure your camera doesn't separate from your bike during use.


Step 1: Install the mount

  • Slide seat post mount onto your Fly6 Original, you should hear a click
  • Use provided spacers to ensure Fly6 Original is at 90 degrees to the ground
  • Hold your Fly6 Original against the seat post to check unit orientation


Step 2: Choose the appropriate spacer

  • Take selection of provided alignment spacers
  • Select the appropriate one, so that your Fly6 sits perpendicular to the ground

Step 3: Mount your camera to your bike

  • Hold against seat post (for aero seat posts, place aero spacer on post first and use longer straps)
  • Wrap straps around seat post and affix clasps to hooks
  • Ensure unit is securely fixed avoiding any excessive movement or tilt


Ready for your first ride? Check out Using Your Fly6 Original



Did you find it helpful? Yes No

Can you please tell us how we can improve this article?