To turn the Fly6 CE on and start recording, press and hold the power button for at least 2 seconds. Upon powering on, the Fly6 CE will play a power up sequence of beeps followed by up to 4 beeps to indicate battery level. The round bezel around the camera lens will emit a red light that rotates and the LEDs underneath the bezel will light up – this indicates that the device is recording.
|Battery level is under 25%||1 beep|
|Battery level is 25-50%||2 beeps|
|Battery level is 50-75%||3 beeps|
|Battery level is 75%+||4 beeps|
For more information on the sounds emitted by your device check out the sound and visual guide.
Pressing the Q button will toggle through the brightness of the bike light, while pressing the power button toggles through light modes (constant, pulse, flash or camera only).
Other settings can be customised through the CycliqPlus mobile app or desktop app. These include:
- Logo and timestamp (on/off)
- Electronic Image Stabilisation
- Video resolution
- Segment length
- Light modes
- Beep intervals
Ready to check out what you #ShotontheFly? See Reviewing your Fly6 CE footage.