Battery When charging your Fly6 Gen3, the charge indicator LED (top of the ring bezel) will be solid red. Once the battery is fully charged, this LED will...

Needs Hardware Manual and graphics from cycliq plus app There are several ways you can format your SD card but we recommend that you format via the Cycl...

Needs Hardware Manual A bench test is a test to ensure a device works as specified. A bench test for your Fly6 Gen3 device is to check that the life of ...

There is currently no firmware updates available for the Fly6 Gen3 Once a firmware update is available, instructions will be available here.

Performing a Master Reboot The Fly6 Generation 3 must be powered on to perform this reboot. This reboot is only recommended if you are unable to turn th...

The Fly6 GEN 3 has a bike alarm that can be activated via the CycliqPlus mobile app. If the device is moved while the alarm function is active, the alarm w...

1. Go to https://cycliq.com/register/ and fill in the registration form 2. Select Fly6 GEN 3 and enter your serial number. This can be found by: Connecti...