So your Fly6 Pro has been working extra hard on your bike and something has gone awry. We've sent you a Replacement Rear Housing, and you're ready to install it. Today we'll cover removing the Rear Housing from your Fly6 Pro and everything you need t

<p>So your Fly6 Pro has been working extra hard on your bike and something has gone awry. We&apos;ve sent you a Replacement Rear Housing, and you&apos;re ready to install it. Today we&apos;ll cover removing the Rear Housing from your Fly6 Pro and everything you need to perform the work, things you need to be careful of, and just general advice to make sure you feel comfortable working on your device.&#xA0;</p><h3 id="estimated-time-required-disassembly-only-10-minutes">Estimated Time required (disassembly only): 10 Minutes</h3><h3 id="difficulty-easy-with-some-potential-snags-to-look-out-for">Difficulty: Easy with some potential snags to look out for</h3><h2 id="before-we-get-started-required-tools">Before we get started: required tools</h2><ul><li>A pair of fine tipped tweezers <strong>OR</strong> a sim ejection tool <strong>OR</strong> another fine tipped instrument</li><li>A long shank Philips Head screwdriver (PH1 recommended)</li><li>Your Fly6 Pro</li></ul><p><br id="isPasted"><span class="fr-img-caption fr-fic fr-dii" style="width: 688px;"><span class="fr-img-wrap"><img src="https://attachments.gorgias.help/r1WE86rbrko6J4Mv/hc/GyBLV6kLwK2NbQkK/2025100106-67fbe530-ab28-4691-948f-f5f5bb04f0ff-cyc_ce604_back_panel_assemebly.jpg" class="fr-fic fr-dii"><span class="fr-inner">Everything you need to get started.</span></span></span></p><h2 id="isPasted">Step 1: Removing the Rear Housing Plugs</h2><p>These four nifty little plugs in the corners of the Fly6 Pro Rear Housing have been busy keeping water out of your device but now it&apos;s time to remove them.<span class="fr-img-caption fr-fic fr-dib" style="width: 692px;"><span class="fr-img-wrap"><img src="https://attachments.gorgias.help/r1WE86rbrko6J4Mv/hc/GyBLV6kLwK2NbQkK/2025100107-029caf0e-0ccc-4fdf-93a3-c0fb729d3711-cycliq_back_view_transparent_4k.png" class="fr-fic fr-dib"><span class="fr-inner">The location of the Fly6 Pro&apos;s four Plugs</span></span></span></p><p>Using your fine tipped tool, dig the tip into the squishy Plugs and grab and pull, or lever them out. We know this isn&apos;t all that easy to do without damaging, so we&apos;ve included 4 spare Plugs with the Replacement Rear Housing.</p><blockquote>The Rear Housing Plugs are not all identical, so try to keep them seperate so you can put your Plugs, or your replacement Plugs back in the matching holes later on.&#xA0;</blockquote><p><span class="fr-img-caption fr-fic fr-dii" style="width: 688px;"><span class="fr-img-wrap"><img src="https://attachments.gorgias.help/r1WE86rbrko6J4Mv/hc/GyBLV6kLwK2NbQkK/2025100106-83d97667-593e-45aa-8c5a-597ebe7a82bb-cyc_ce604_back_panel_assemebly-2.jpg" id="isPasted" class="fr-fic fr-dii"><span class="fr-inner">Jamie digging into the Fly6 Pro Rear Housing Plugs</span></span></span></p><h2 id="isPasted">Step 2: Removing the Philips head screws</h2><p><strong>Take extra care:&#xA0;</strong>these Philips head screws have been torque&apos;d up seriously tight, so make sure you&apos;re very careful not to strip them with a bad screwdriver. That&apos;d be disastrous...&#xA0;</p><p>Apply a fair amount of force through the shank of the screwdriver into the head of the screw, and loosen slowly, taking extra care not to strip the head of your screws.&#xA0;</p><blockquote>In the image you can see Jamie basically putting his whole body weight into that screwdriver, we mean it, these screws are in tight. Take extra care.</blockquote><p><span class="fr-img-caption fr-fic fr-dib" style="width: 692px;"><span class="fr-img-wrap"><img src="https://attachments.gorgias.help/r1WE86rbrko6J4Mv/hc/GyBLV6kLwK2NbQkK/2025100106-a337c0b9-c141-4608-a014-4a458bb10cc5-cyc_ce604_back_panel_assemebly-3.jpg" class="fr-fic fr-dib" style="width: 692px;"><span class="fr-inner">Jamie applying lots of force to keep the driver head in the screw...</span></span></span></p><h2 id="isPasted">Step 3: Slowly open the housing, cables inside!&#xA0;</h2><p><strong>Another caution note:</strong> the battery is secured to the Fly6 Pro Rear Housing. Open slowly so as to not damage the battery cable or connector.&#xA0;</p><p><span class="fr-img-caption fr-fic fr-dib" style="width: 692px;"><span class="fr-img-wrap"><img src="https://attachments.gorgias.help/r1WE86rbrko6J4Mv/hc/GyBLV6kLwK2NbQkK/2025100106-ce9a924d-4f81-466e-9c1e-e211530b4d71-cyc_ce604_back_panel_assemebly-4.jpg" class="fr-fic fr-dib"><span class="fr-inner">Tada! The Fly6 Pro&apos;s inner workings.</span></span></span><span class="fr-inner" contenteditable="true"></span><span contenteditable="false" class="fr-img-caption fr-fic fr-dib fr-draggable" style="width: 692px;" draggable="false"><span class="fr-img-wrap"><span class="fr-inner" contenteditable="true"></span></span></span></p><h2 id="step-4-remove-the-battery-bracket-from-your-rear-housing">Step 4: Remove the Battery Bracket from your Rear Housing</h2><p>There are four more Phillips head screws holding the battery bracket in place on the Rear Housing, and they&apos;re a lot easier to get out than the last ones.&#xA0;</p><p><strong>Note:</strong> before you remove the Battery Bracket, look at how the Battery Cable runs to the main board, as you&apos;ll want to try and keep the cable wrapped between the Battery and the Battery Bracket in the same way.</p><p><strong>Congratulations!</strong> Once you&apos;ve unscrewed these this is as far as you need delve into your Fly6 Pro, no need to unplug anything or do anything else. Once you get here if you find any dirt, grit or debris (<em>you really shouldn&apos;t unless you&apos;ve been riding with your door open... weren&apos;t the beeps annoying?</em>)<em>&#xA0;</em>you should clean that out with a microfiber cloth or paper towel if you have any on hand.&#xA0;</p><blockquote id="isPasted">We don&apos;t include a replacement battery bracket or screws to secure it. Keep your screws organised! Also be careful not to bend the bracket or lean on it as it is relatively flexible.&#xA0;</blockquote><p><span class="fr-img-caption fr-fic fr-dib" style="width: 692px;"><span class="fr-img-wrap"><img src="https://attachments.gorgias.help/r1WE86rbrko6J4Mv/hc/GyBLV6kLwK2NbQkK/2025100106-8b4127a2-317e-4d1c-a0a7-68c16ddad50b-cyc_ce604_back_panel_assemebly-6.jpg" class="fr-fic fr-dib"><span class="fr-inner">Two of the screws securing the Fly6 Pro Battery Bracket</span></span></span></p><h2 id="isPasted">Next steps:&#xA0;</h2><p>You&apos;re likely here because you need to replace the Rear Housing of your Fly6 Pro. Once you remove the Battery Bracket from the Rear Housing the steps to install the replacement Rear Housing are the same as you just performed in reverse.</p><p><span class="fr-img-caption fr-fic fr-dib" style="width: 692px;"><span class="fr-img-wrap"><img src="https://attachments.gorgias.help/r1WE86rbrko6J4Mv/hc/GyBLV6kLwK2NbQkK/2025100107-19399598-9390-41d2-9cbe-71da8db641aa-cyc_ce604_back_panel_assemebly-7.jpg" class="fr-fic fr-dib"><span class="fr-inner">Fly6 Pro ready for a new Rear Housing</span></span></span></p><p>Before you start installing your new Fly6 Pro Rear Housing please ensure that it has an O-ring. It will be securely installed in the lip around the edge of the Fly6 Pro Rear Housing, if your Rear Housing doesn&apos;t have an O-ring do not hesitate to <a href="https://cycliq.com/contact/support/" target="_blank" rel="noopener noreferrer">contact us</a> as this will compromise your Fly6 Pro&apos;s waterproofing!&#xA0;<span class="fr-img-caption fr-fic fr-dib" style="width: 692px;"><span class="fr-img-wrap"><img src="https://attachments.gorgias.help/r1WE86rbrko6J4Mv/hc/GyBLV6kLwK2NbQkK/2025100107-060ee12a-898b-43e2-b695-2bbb2a0fd0fb-cyc_ce604_back_panel_assemebly-8.jpg" class="fr-fic fr-dib"><span class="fr-inner">Highlighted O-Ring on the Fly6 Pro Rear-Housing</span></span></span></p><h2 id="installing-a-new-rear-housing">Installing a new Rear Housing:</h2><ol><li>Being careful not to strain the cable, secure your Battery to the new Rear Housing with your Battery Bracket and the screws you removed earlier.</li><li>Take your Fly6 Pro and install the new Rear Housing.</li><li>Using the new screws provided with the Rear Housing, secure the Rear Housing in place.&#xA0;</li><li>Install the Rear Housing Plugs.</li></ol><p><br></p><p>Once you&apos;ve got your new Rear Housing installed you&apos;re back in business with your Fly6 Pro keeping an eye out from your tail. Happy riding!&#xA0;</p>

Rear Housing Removal

So your Fly6 Pro side door has proven faulty. We've sent you a Replacement Door Assembly, and you're ready to install it. Today we'll cover removing the old side door from your Fly6 Pro and everything you need to perform the work, things you need to

<p style=" text-decoration: none;" id="isPasted">So your Fly6 Pro side door has proven faulty. We&apos;ve sent you a Replacement Door Assembly, and you&apos;re ready to install it. Today we&apos;ll cover removing the old side door from your Fly6 Pro and everything you need to perform the work, things you need to be careful of, and just general advice to make sure you feel comfortable working on your device.&#xA0;</p><h3 style=" text-decoration: none;" id="estimated-time-required-disassembly-only-5-minutes">Estimated Time required (disassembly only): 5 Minutes</h3><h3 style=" text-decoration: none;" id="difficulty-very-easy-though-some-springs-that-may-go-flying-spare-included-in-replacement-parts">Difficulty: Very easy, though some springs that may go flying... spare included in replacement parts.</h3><h2 style=" text-decoration: none;" id="before-we-get-started-required-tools">Before we get started: required tools</h2><ul style=" text-decoration: none;"><li>A long shank Philips Head screwdriver (PH1 recommended)</li><li>Your Fly6 Pro!</li></ul><h2 style=" text-decoration: none;" id="step-1-opening-door-and-removing-hinge-screws">Step 1: Opening Door and Removing Hinge Screws</h2><p style=" text-decoration: none;">Open the door on your Fly6 Pro as you would when removing the memory card. If your hinge is broken and your door missing, you may proceed, but perhaps in the future you should be a little more careful with your Fly6 Pro...</p><p style=" text-decoration: none;">Using your screwdriver, undo the screws on the hinge. &#xA0;<img src="https://attachments.gorgias.help/r1WE86rbrko6J4Mv/hc/GyBLV6kLwK2NbQkK/2026011208-777446fb-c969-462a-b377-bb30db58849d-cq_ce604_door_replacement-2.jpg" class="fr-fic fr-dib"></p><h2 style=" text-decoration: none;" id="step-2-removing-door-and-hinge">Step 2: Removing Door and Hinge</h2><p style=" text-decoration: none;">Once the screws are removed, grab the door and pull on it to remove the hinge from the housing. This may feel a little stubborn at first but don&apos;t fret, you won&apos;t break anything!</p><h2 style=" text-decoration: none;" id><img src="https://attachments.gorgias.help/r1WE86rbrko6J4Mv/hc/GyBLV6kLwK2NbQkK/2026011208-be9baeef-1229-4bd4-977b-8c3d42decb20-cq_ce604_door_replacement-24.jpg" class="fr-fic fr-dii" style="width: 682px;"></h2><h2 style=" text-decoration: none;" id="step-3-remove-the-latch-screws">Step 3: Remove the Latch Screws</h2><p style=" text-decoration: none;">Using your screwdriver again, undo the screws at the other end of the door assembly.</p><h2 style=" text-decoration: none;" id="-1"><img src="https://attachments.gorgias.help/r1WE86rbrko6J4Mv/hc/GyBLV6kLwK2NbQkK/2026011208-811c510a-d653-417d-8383-8e0bcce6eadc-cq_ce604_door_replacement-20.jpg" class="fr-fic fr-dib" style="width: 692px;"></h2><h2 style=" text-decoration: none;" id="step-4-removing-the-latch">Step 4: Removing the Latch</h2><p style=" text-decoration: none;">Using your screwdriver or a fine pry tool, gently lift the latching system away from the device body. &#xA0;Do this slowly, as there is a spring in this system that you don&apos;t want to lose.</p><p style=" text-decoration: none;"><img src="https://attachments.gorgias.help/r1WE86rbrko6J4Mv/hc/GyBLV6kLwK2NbQkK/2026011208-3c44a6e5-715f-4a4b-aeaf-f1d263bdc7f1-cq_ce604_door_replacement-12.jpg" style="width: 682px;" class="fr-fic fr-dib"></p><p style=" text-decoration: none;">Make sure to take note of the spring and latch placement when you take it off, you&apos;ll need to remember this when putting everything together.</p><h2 style=" text-decoration: none;" id="-2"><img src="https://attachments.gorgias.help/r1WE86rbrko6J4Mv/hc/GyBLV6kLwK2NbQkK/2026011208-ac8b6b7d-94eb-421a-bb8c-978a8463b920-cq_ce604_door_replacement-16.jpg" class="fr-fic fr-dii" style="width: 682px;"><br></h2><h2 style=" text-decoration: none;" id="-3"><br></h2><h2 style=" text-decoration: none;" id="step-5-identifying-the-correct-screws">Step 5: Identifying the correct screws</h2><p style=" text-decoration: none;">Our earlier Fly6 Pro models used a different screw system, you might have noticed there were two different types in your replacement door assembly package. &#xA0;Use the following criteria and images below to identify which ones you need:</p><p style=" text-decoration: none;"><strong>Type A (plastic screws):</strong> These are for plastic standoffs</p><p style="text-decoration: none; text-align: center;"><img src="https://attachments.gorgias.help/r1WE86rbrko6J4Mv/hc/GyBLV6kLwK2NbQkK/2026011208-a6f9ee80-933b-4d3c-b93b-873483d4f7cf-cq_ce604_door_replacement-13.jpg" class="fr-fic fr-dii" style="width: 682px;"><img src="https://attachments.gorgias.help/r1WE86rbrko6J4Mv/hc/GyBLV6kLwK2NbQkK/2026011208-03994a52-3e0a-40e2-b2a5-0d96493a900b-ba7a5652-9886-4234-bc25-04181bead9c5.png" id="isPasted" class="fr-fic fr-dii" style="width: 682px;"></p><p style=" text-decoration: none;"><strong>Type B (machine screws):</strong> These are for metal standoffs<img src="https://attachments.gorgias.help/r1WE86rbrko6J4Mv/hc/GyBLV6kLwK2NbQkK/2026011208-fda14ae4-cf5f-4611-a4b0-d794a1b44487-e43ca5fc-7b00-4259-8ae0-29163012773e.png" id="isPasted" class="fr-fic fr-dii" style="width: 682px;"></p><h2 style=" text-decoration: none;" id="step-5-replacing-the-latch-assembly">Step 5: Replacing the Latch Assembly</h2><p style=" text-decoration: none;">Once you&apos;ve removed the old door assembly and figured out the correct screws, it&apos;s time to put everything together again.</p><h2 style=" text-decoration: none;" id="isPasted"><img src="https://attachments.gorgias.help/r1WE86rbrko6J4Mv/hc/GyBLV6kLwK2NbQkK/2026011208-690fc591-d577-45b9-8938-59111add7203-1ad10fd9-ed93-490f-8645-44e41f8a217b.png" class="fr-fic fr-dii" style="width: 682px;"></h2><p style=" text-decoration: none;">Make sure the spring and latch is in the correct position as earlier (as seen above). Simply press the latch assembly down onto the standoffs. Once in place, use your screw driver to secure the correct type of screws for your device into the new latching system.</p><h2 style=" text-decoration: none;" id="step-6-attaching-the-replacement-door">Step 6: Attaching the Replacement Door</h2><p style=" text-decoration: none;">Place the new hinge and door down on top of the standoffs, and press down to securely fit the hinge. Once in place, insert the new screws and tighten them so everything fits flush. Tightening your screws might be easier with the door closed.</p><p style=" text-decoration: none;"><br></p><p style=" text-decoration: none;"><span style=" text-decoration: none;">Once you&apos;ve got your new replacement door installed you&apos;re back in business with your Fly6 Pro keeping an eye out from your tail. Happy riding!&#xA0;</span></p><p><br></p><p><br></p>

Door Assembly Removal

Shop

Contact Support

Cycliq

Guides on how to perform your own repairs and disassembly of the device to ensure that if you're going to play with it, you don't break it...

Repairs and dissasembly

Fly6 Pro

Fly6 Pro Video Tutorials

Introducing The Fly6 Pro

How To: Operate Your Fly6 Pro

How To: Mount Your Fly6 Pro

How To: Attach Fly6 Pro Lens Protectors

How To: Connect Your Fly6 Pro To CycliqPlus

How To: WiFi Transfer With The Fly6 Pro

Video Tutorials

Fly6 Pro User Manual

Setting up your Fly6 Pro

Getting to know the OLED screen on your Fly6 Pro

Mounting your Fly6 Pro

Reviewing your Fly6 Pro footage

Getting Started

Master reset

Fly6 Pro WiFi Transfer with CycliqPlus

How to register your Fly6 Pro

How to update your Fly6 Pro firmware

How to perform a bench test

How to format your microSD card

How to connect your Fly6 Pro with USB OTG Readers

How-to Guides

Applying the Fly6 Pro Lens Protector

Accessories

microSD Card Compatibility

Power Issues

Connectivity Issues

Footage Issues

Battery Issues

Recording Issues

Help

Fly12 Sport Video Tutorials

How To: Operate Your Fly12 Sport

How To: Tether Your Fly12 Sport

How To: Charge Your Fly12 Sport

How To: Mount Your Fly12 Sport

How To: Attach Fly12 Sport Lens Protectors

How To: Review Your Footage On A Desktop

How To: Format Your MicroSD Card On Mobile

How To: Format Your MicroSD Card On Desktop

How To: Perform A Master Reset On Your Fly12 Sport

Fly12 Sport User Manual

Setting up your Fly12 Sport

Mounting your Fly12 Sport

Reviewing your Fly12 Sport footage

How to master reset your Fly12 Sport

How to register your Fly12 Sport

How to update your Fly12 Sport firmware

How to factory reset your Fly12 Sport

Fly12 Sport

Fly6 Gen3 Video Tutorials

Fly6 Generation 3 User Manual

Setting up your Fly6 Generation 3

Mounting your Fly6 Generation 3

Start up and first ride

Reviewing your Fly6 Generation 3 Footage

How to register your Fly6 Generation 3

How to reset the Fly6 Generation 3 with deep sleep mode

How to update your Fly6 Generation 3 firmware

How to use the bike alarm

How to perform a master reset on a Fly6 Generation 3

Fly6 Gen3

CycliqPlus Smartphone System Requirements

Smartphone Connectivity Issues

Why can’t I connect my device to the app?

CycliqPlus Mobile

CycliqPlus Desktop - Minimum System Requirements

Desktop Connectivity Issues

Safety Tramlines

Working with your Fly Devices

Video Editor

Metrics Overlay

CycliqPlus Desktop

Installing CycliqPlus Edge

Using CycliqPlus Edge

Configuring Auto Start Up

CycliqPlus Edge Device Requirements

Configure Start Up Modes

CycliqPlus Edge

CycliqPlus

Are tax and duty fees included?

Do you accept bulk purchases?

Ordering Online

Is there a warranty?

Caution

Do you have a returns policy?

Do you have a service centre for repairs?

I accidentally damaged my device. Can I purchase replacement parts?

How long is the battery life?

Why is my device turning off?

My device is not taking charge, what should I do?

My device is not turning on, what should I do?

Where can I send my unit for warranty?

Do you have a phone number I can call?

What type of SD cards can we use?

Customer Support

Fly12 CE User Manual

Setting up your Fly12 CE

Mounting your Fly12 CE

Reviewing your Fly12 CE footage

How to register your Fly12 CE

How to perform a master reset on a Fly12 CE

How to connect your Fly12 CE with USB On-The-Go

Recording issues

Battery issues

Fly12 CE

Fly12 User Manual

Fly12 Quick Start Guide

Setting up your Fly12

Mounting your Fly12

Using your Fly12

Understanding beeps and lights on a Fly12

Reviewing your Fly12 footage

How to format your SD card

How to mount and attach a tether to Fly12

How to update your Fly12 firmware

How to perform a master reset on a Fly12

How to connect your Fly12

I can’t connect to my smartphone

I can’t get my video onto my computer

My device is not recording properly

Battery life

Fly12 (Non-CE)

Fly6 CE User Manual

Setting up your Fly6 CE

Mounting your Fly6 CE

Reviewing your Fly6 CE footage

How to register your Fly6 CE

CE to ANT+Connection Guide for Fly6

How to connect your Fly6 CE with USB On-The-Go

How to perform a master reset on a Fly6 CE

Fly6 CE

Fly6 User Manual

Fly6 Quick Start Guide

Setting up your Fly6

Mounting your Fly6

Using your Fly6

Understanding beeps on a Fly6

Reviewing your Fly6 footage

How to update your Fly6 firmware

Issues with my footage

Fly6 (Non-CE)

Fly6[v] User Manual

Fly6[v] Quick Start Guide

Setting up your Fly6[v]

Mounting your Fly6[v]

Using your Fly6[v]

Understanding beeps on a Fly6[v]

Reviewing your Fly6[v] footage

How to update your Fly6[v] firmware

Fly6[V]

Fly6 Original Quick Start Guide

Fly6 Original User Manual

Setting up your Fly6 Original

Mounting your Fly6 Original

Using your Fly6 Original

Understanding beeps on a Fly6 Original

Reviewing your Fly6 Original footage

How to install Fly6 Original firmware

Fly6 Original

Legacy Fly Devices

Fly6 Pro Quick Start Guide

Fly12 Sport Quick Start Guide

Fly6 GEN 3 Quick Start Guide

Fly12 CE Quick Start Guide

Fly6 CE Quick Start Guide

Quick Start Guides